View LTA121C250F_3657616.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

product information *the information contained herein is present ed only as a guide for the applications of our products. no responsibility is assum ed by toshiba matsushita display technology or other rights of the third partie s which may result from its use. no license is granted by impl ication or otherwise under any patent or patent rights of to shiba matsushita display technology or others. *the information contained herein may be changed without prior notic e. it is therefore advisable to contact toshiba matsushita display technology before proceeding with the design of equipment incorporating this product. (1/11) 2007- 11-1 (ver.0.3r) 31cm color tft-lcd module (12.1type) LTA121C250F ( p -si tft ) features (1) 12.1 xga color display with high luminance (2) built in long life lamps(mttf:60,000 h) ( condition/ t a:25 c, i fl :6.0ma(rms)(continuing lighting), f fl :40khz ) (3) replaceable structure of lamp unit and mounting compatible with ltd121ga0s (12.1 xga p-si tft), ltd121c3*s (12.1 svg a a-si tft) and lta121c3*sf(12.1 svga p-si tft) series. (4) reverse scan function (5) rohs compatible (6) wide operating temperature. mechanical specifications item specifications dimensional outline (typ.) 278.3 ( w ) x 209.0 ( h ) x 12.0max ( d ) mm number of pixels 1024 ( w ) x 768 ( h ) pixels active area 245.76 ( w ) x 184.32( h ) mm viewing area 246.8 ( w ) x 185.4 ( h ) mm pixel pitch 0.24 ( w ) x 0.24 ( h ) weight (approximately) tbd backlight sidelight ( 2 ccfls) absolute maximum ratings item min. max. unit ( v dd ) -0.3 4.0 v supply voltage ( v fl ) 0 2.0 kv(rms) fl driving frequency ( f fl ) --- 100 khz input signal voltage ( v in ) -0.3 v dd +0.3 v operating temperature *1 -20 70 c storage temperature -30 80 c storage humidity (max. wet bulb temperature = 39 c) 10 90 %(rh) *1: wet bulb temperature should be 39 c max., and no condensation of water. electrical specification ( t a=25 c ) (recommended operation condition) item min. typ. max. unit remarks ( v dd ) 3.0 3.3 3.6 v supply voltage ( v fl ) --- tbd --- v(rms) i fl =6.0ma(rms) fl start voltage (v sfl ) tbd --- --- v(rms) t a=0 c differential input voltage ( v id ) 100 --- 600 mv common mode input voltage ( v cm ) 1.0 --- 2.4-( v id )/2 v ( i dd ) *3 --- tbd --- ma current consumption ( i fl ) *4 3.0 --- 6.5 ma(rms) power consumption *1 *2 --- tbd --- w i fl =6.0ma(rms) *2: the surface temperature caused by self heat radi ation of cell itself is specified on this item *3: 8 color bars pattern *4: except the efficiency of fl inverter optical specification ( t a=25 c) item min. typ. max. unit remarks contrast ratio ( cr ) (350) (500) --- --- (upper+lower) --- 100 --- ?? viewing angle ( cr 10) (left+right) --- 120 --- ?? ( t on ) --- 10 --- ms response time ( t off ) --- 30 --- ms luminance ( l ) (320) (400) --- cd/m 2 i fl =6.0ma(rms) lamp life time (mtbf)* 5 * 6 60,000 h *5 : conditions ; t a=25 c, i fl =6.0ma(rms), continuous lighting *6 : definitions of failure ; 1) lcd luminance becomes half of the minimum va lue. 2) lamp doesn?t light normally. tentative toshiba matsushita displa y technolo gy co., ltd all information is subject to change without notice. please read bottom notes. rohs compatible www.datasheet.co.kr datasheet pdf - http://www..net/
LTA121C250F (2/ 11 ) 2007- 11-1 (ver.0.3r) dimensional outline (front) rear side b/l-cn(bhr-04vs-1) nn 161 274 .3 33 138 136 .5 245 .76 184 .32 189 .4 48 .4 37 .5 12 max . 4 4 7.05 2.7 4.3 4.3 2.7 250 .8 7.5 4.6 4.6 7.7 7.5 4.6 7.5 4.6 tentative 5.5+/-0.3 +/-0.3 270 .3+ / -0 .2 (209 ) 205 (278 .3 ) 4 97 (a .a . cen te r ) 185 .8+ / -0 .2 270 .3+ / -0 .2 274 .3 23+ / -0 .2 138+ / -0 .2 80+ / -0 .5 2.5 4.3 tentative unit : mm standard tolerance : 0.5 www.datasheet.co.kr datasheet pdf - http://www..net/
LTA121C250F (3/ 11 ) 2007- 11-1 (ver.0.3r) dimensional outline (rear) +0 .50 n- n sca le 5 :1 7.7 3.4 13 .45 3.9 7.5 0.24-0.35 3.9 3.4 4.6 7.5 6.1 3.9 5 6.1 2 - 4 . 2 4 - 4 7.5 7.3 6.1 4 7.75 3.9 6.1 7.5 note) the different points between LTA121C250F and ltd121ga0s are the below. 1) LTA121C250F lamp unit is different from ltd121ga0s. 2) the metal pcb shield is added in LTA121C250F. 3) the rear structure is changed. the aluminum back sheet is removed and the plastic frame design is different from ltd121ga0s. the screw?s position of the pcb-gnd and the lamp unit is different from ltd121ga0s. there are slight differences. (refer to page.3 rear dimensional outline in detail.) 4) LTA121C250F operating temperature is wider than that of ltd121ga0s. 5) LTA121C250F total weight is different from ltd 121ga0s. (refer to page.1 mechanical specification.) tentative unit : mm standard tolerance : 0.5 www.datasheet.co.kr datasheet pdf - http://www..net/
LTA121C250F (4/ 11 ) 2007- 11-1 (ver.0.3r) block diagram sequence of power supplies and signals cn1 circuit generation voltage manipulation gray scale 1024 x 768 pixels connector liquid crystal panel converter dc/dc y-driver panel controller lvds include x-driver backlight backlight cn2 rxck+/- 0.2v 3.0v rxin3+/- rxin2+/- rxin0+/- 0.2v 0.2v dd v v v sfl fl 10% v sfl 10% v fl fl input voltage 3.0v 10ms (max.) 0.1ms (min.) 100ms (max.) 500ms (min.) 0ms (min.) 40ms (max.) 0ms (min.) 40ms (max.) 250ms(min.) 2sec(min.) 0ms(min.) v cm v || id www.datasheet.co.kr datasheet pdf - http://www..net/
LTA121C250F (5/ 11 ) 2007- 11-1 (ver.0.3r) timing chart tv tvw vsync tvsu tvhd th hsync tv ?? p tvbp tv d tvds de 1023 1024 12 th thw hsync thbp thfp thds thd de 1024 pixel clk 234 1 www.datasheet.co.kr datasheet pdf - http://www..net/
LTA121C250F (6/ 11 ) 2007- 11-1 (ver.0.3r) timing specification 1) 2) 3) 4) 5) 6) 7) item symbol min. typ. max. unit horizontal scanning term t h 1334 x t c 1344 x t c --- clock h-sync pulse width t hw 4 x t c 136 x t c --- clock horizontal front porch t hfp 4 x t c 24 x t c --- clock horizontal back porch t hbp 24 x t c 160 x t c --- clock horizontal data sync period t hds 32 x t c 296 x t c --- clock horizontal display term t hd 1024 x t c 1024 x t c 1024 x t c clock frame period t v 778 x t h 806 x t h 860 x t h line v-sync pulse width t vw 2 x t h 6 x t h --- line v-sync set up time (to h-sync) t vsu 8 x t c --- --- clock v-sync hold time t vhd (thbp+16) x t c --- --- clock vertical front porch t vfp 1 x t h 3 x t h --- line vertical back porch t vbp 2 x t h 29 x t h --- line vertical data sync period t vds 8 x t h 35 x t h --- line vertical display term t vd 768 x t h 768 x t h 768 x t h line clock period t c 15.0 15.38 --- ns note 1) refer to ?timing chart? and lvds (thc63lvd f84a-85) specifications by thine electronics, inc. corporation. note 2) if de is fixed to "h" or "l" leve l for certain period while nclk is supplied, the panel displays black with some flick er. note 3) if nclk is fixed to "h" or "l" level for certain period while de is supplied, the panel may be damaged. note 4) please adjust lcd operating signal timing and fl driving frequency, to optimize the display quality. there is a possibility that flicker is observed by the in terference of lcd operating signal timing and fl driving condition (especially driving frequency), even if the condition satisfies above timing specifications and recommended operating conditions shown in 3. note5 ) do not make tv , t vhd and tvds fluctuate. if t v, t vhd, and t vds are fluctuate, the panel displays black. note6) in case of using the long fr ame period, the deterioration of display quality, noise etc. may be occurred. note7) nclk count of each horizontal scanning time should be always the same. v-blanking period should be ? n ? x ?horizontal scanning time?. ( n : integer) frame period should be always the same. www.datasheet.co.kr datasheet pdf - http://www..net/
LTA121C250F (7/ 11 ) 2007- 11-1 (ver.0.3r) connector pin assignment for interface cn1 input signal connector : df19l-20p-1h(56) / hirose mating connector : df19g-20s-1f (fpc), df19g-20s-1c (cable) / hirose terminal no. symbol function 1 v dd power supply : +3.3v 2 v dd power supply : +3.3v 3 v ss gnd 4 v ss gnd 5 rxin0- negative lvds differential data input (r0-r5,g0) 6 rxin0+ positive lvds differential data input (r0-r5,g0) 7 v ss gnd 8 rxin1- negative lvds differential data input (g1-g5, b0-b1) 9 rxin1+ positive lvds differen tial data input (g1-g5, b0-b1) 10 v ss gnd 11 rxin2- negative lvds differential data input (b2-b5, hs, vs, de) 12 rxin2+ positive lvds differenti al data input (b2-b5, hs, vs, de) 13 v ss gnd 14 clk- clock signal(-) 15 clk+ clock signal(+) 16 v ss gnd 17 u/d vertical reverse("l" level or open ; normal, "h" level : reverse) 18 l/r horizontal reverse("l" level or open ; normal, "h" level : reverse) 19 nc nc 20 v ss gnd note 1) please connect gnd pin to ground. don' t use it as no-connect nor connection with high impedance. cn2 ccfl power source connector : bhr-04vs-1 / japan solderless terminal mfg co., ltd. mating connector 4) : sm04(4.0)b-bhs-1 / japan solderless terminal mfg co., ltd. terminal no. symbol function 1 v flh1 ccfl power supply ( high voltage) 2 v flh2 ccfl power supply ( high voltage) 3 nc 1) non connection (open) 4 v fll ccfl power supply (low voltage) note 2) nc terminal should be open. note 3) see next page. note 4) take away terminal no.3 of the mating connec tor. if does not take away, it may cause smoke burn of electrical parts by high voltage. www.datasheet.co.kr datasheet pdf - http://www..net/
LTA121C250F (8/ 11 ) 2007- 11-1 (ver.0.3r) recommended transmitter (thc63lvdf63a,thc63lvdm63a,thc63lvdm63a-85) to ltd121ga0s interface assignment case1: 6bit transmitter thc63lvdf63a,thc63lvdm63a,thc63lvdm63a-85 input terminal no. input signal (graphics controller output signal) ltd121ga0s interface (cn1) symbol terminal symbol function output signal symbol terminal symbol tin0 44 r0 red pixels display data (lsb) tin1 45 r1 red pixels display data tin2 47 r2 red pixels display data tin3 48 r3 red pixels display data tin4 1 r4 red pixels display data tin5 3 r5 red pixels display data (msb) tin6 4 g0 green pixels display data (lsb) tout0- tout0+ no.5 no.6 in0- in0+ tin7 6 g1 green pixels display data tin8 7 g2 green pixels display data tin9 9 g3 green pixels display data tin10 10 g4 green pixels display data tin11 12 g5 green pixels display data (msb) tin12 13 b0 blue pixels display data (lsb) tin13 15 b1 blue pixels display data tout1- tout1+ no.8 no.9 in1- in1+ tin14 16 b2 blue pixels display data tin15 18 b3 blue pixels display data tin16 19 b4 blue pixels display data tin17 20 b5 blue pixels display data (msb) tin18 22 hsync h-sync tin19 23 vsync v-sync tin20 25 de compound synchronization signal tout2- tout2+ no.11 no.12 in2- in2+ clk in 26 clk data sampling clock tclk out- tclk out+ no.14 no.15 clk- clk+ note 1) please connect nc pin to nothing. don't connect it to ground nor to other signal input. g0 r5 r4 r3 r2 r1 r0 g5 b0 b1 g4 g1 b4 b5 g3 g2 b2 b3 in 0 in 1 in 2 tin4 tin3 tin2 tin1 tin0 tin13 t in 1 2 t in 1 1 t in 1 0 t in 9 t in 8 tin7 tin20 t in19 t in18 t in17 t in16 t in15 tin14 tin6 tin5 hsync vsync de www.datasheet.co.kr datasheet pdf - http://www..net/
LTA121C250F (9/ 11 ) 2007- 11-1 (ver.0.3r) recommended transmitter (thc63lvdf63a,thc63lvdm63a,thc63lvdm63a-85) to ltd121ga0s interface assignment case2: 8bit transmitter thc63lvdf63a,thc63lvdm63a,thc63lvdm63a-85 input terminal no. input signal (graphics controller output signal) ltd121ga0s interface (cn1) symbol terminal symbol function output signal symbol terminal symbol tin0 51 r0 red pixels display data (lsb) tin1 52 r1 red pixels display data tin2 54 r2 red pixels display data tin3 55 r3 red pixels display data tin4 56 r4 red pixels display data tin6 3 r5 red pixels display data (msb) tin7 4 g0 green pixels display data(lsb) tout0- tout0+ no.5 no.6 in0- in0+ tin8 6 g1 green pixels display data tin9 7 g2 green pixels display data tin12 11 g3 green pixels display data tin13 12 g4 green pixels display data tin14 14 g5 green pixels display data(msb) tin15 15 b0 blue pixels display data (lsb) tin18 19 b1 blue pixels display data tout1- tout1+ no.8 no.9 in1- in1+ tin19 20 b2 blue pixels display data tin20 22 b3 blue pixels display data tin21 23 b4 blue pixels display data tin22 24 b5 blue pixels display data (msb) tin24 27 hsync h-sync tin25 28 vsync v-sync tin26 30 de compound synchronization signal tout2- tout2+ no.11 no.12 in2- in2+ tin27 50 nc non connection (open) tin5 2 nc non connection (open) tin10 8 nc non connection (open) tin11 10 nc non connection (open) tin16 16 nc non connection (open) tin17 18 nc non connection (open) tin23 25 nc non connection (open) tout3- tout3+ clk in 31 clk data sampling clock tclk out- tclk out+ no.14 no.15 clk- clk+ note 1) please connect nc pin to nothing. don't connect it to ground nor to other signal input. g0 r5 r4 r3 r2 r1 r0 g5 b0 b1 g4 g1 b4 b5 g3 g2 b2 b3 in 0 in 1 in 2 nc nc in 3 nc nc nc nc nc tin22 tin21 tin20 tin19 tin23 t in17 t in16 t in11 t in10 t in5 tin27 tin7 tin6 tin4 tin3 tin2 tin1 tin0 tin18 t in15 t in14 t in13 t in12 t in9 tin8 tin26 tin25 tin24 hsync vsync de www.datasheet.co.kr datasheet pdf - http://www..net/
LTA121C250F (10/ 11 ) 2007- 11-1 (ver.0.3r) 256k (k=1024) colors combination table display r5 r4 r3 r2 r1 r0 g5 g4 g3 g2 g1 g0 b5 b4 b3 b2 b1 b0 gray scale level black l l l l l l l l l l l l l l l l l l --- blue l l l l l l l l l l l l h h h h h h --- green l l l l l l h h h h h h l l l l l l --- light blue l l l l l l h h h h h h h h h h h h --- red h h h h h h l l l l l l l l l l l l --- purple h h h h h h l l l l l l h h h h h h --- yello w h h h h h h h h h h h h l l l l l l --- basic color white h h h h h h h h h h h h h h h h h h --- black l l l l l l l l l l l l l l l l l l l 0 l l l l l h l l l l l l l l l l l l l 1 l l l l h l l l l l l l l l l l l l l 2 : : : : : : l3 l60 h h h h l h l l l l l l l l l l l l l61 dark light h h h h h l l l l l l l l l l l l l l62 gray scale of red red h h h h h h l l l l l l l l l l l l red l63 black l l l l l l l l l l l l l l l l l l l 0 l l l l l l l l l l l h l l l l l l l 1 l l l l l l l l l l h l l l l l l l l 2 : : : : : : l3 l60 l l l l l l h h h h l h l l l l l l l61 dark light l l l l l l h h h h h l l l l l l l l62 gray scale of green green l l l l l l h h h h h h l l l l l l green l63 black l l l l l l l l l l l l l l l l l l l 0 l l l l l l l l l l l l l l l l l h l 1 l l l l l l l l l l l l l l l l h l l 2 : : : : : : l3 l60 l l l l l l l l l l l l h h h h l h l61 dark light l l l l l l l l l l l l h h h h h l l62 gray scale of blue blue l l l l l l l l l l l l h h h h h h blue l63 black l l l l l l l l l l l l l l l l l l l 0 l l l l l h l l l l l h l l l l l h l 1 l l l l h l l l l l h l l l l l h l l 2 : : : : : : l3 l60 h h h h l h h h h h l h h h h h l h l61 dark light h h h h h l h h h h h l h h h h h l l62 gray scale of white & black white h h h h h h h h h h h h h h h h h h white l63 www.datasheet.co.kr datasheet pdf - http://www..net/
LTA121C250F (11/ 11 ) 2007- 11-1 (ver.0.3r) for safety lcd module is generally designed with precise parts to achieve light weighted thin mechanical dimensions. in using our modules, make certain that you fully understand and put into practice the warnings and safety precautions detailed in engineering information no.ee-n001,"caut ions and instructions for toshiba lcd modules". refer to individual specifications and technical data s heets (hereinafter called "td") for more detailed technical information. 1) special purposes a) toshiba matsushita display technology's standard lcd modules have not been customized for operation in extreme environments or for use in applications where performance fa ilures could be life-threatening or otherwise catastrophic. b) since toshiba matsushita display technology's standar d lcd modules have not been desi gned for operation in extreme environments, they must never be used in devices that will be exposed to abnormally high levels of vibration or shock which exceed toshiba matsushita display technology's published specification limits. c) in addition, since toshiba matsushita display techno logy standard lcd modules have not been designed for use in applications where performance failures could be life-threatening or catastrophic, they must never be installed in aircraft navigation control systems (such as, but not limited to traffic collision avoidance system and air traffic indicator), in milit ary defense or weapons systems, in critical indu strial process-control systems (e.g., t hose involved in the production of nuclear energy), or in critical medical devi ce or patient life-support systems. 2) disassembling or modification do not disassemble or modify the module. it may damage sensitive pa rts inside lcd module, and may cause scratches or dust on the display. toshiba matsushita display technology doses not warrant the module, if customer di sassembled or modified it. 3) breakage of lcd panel do not ingest liquid crystal material, do not inhale this material, and do not contact the material with skin, if lcd panel is broken and liquid crystal material spills out. if liquid crystal material comes into mouth or eyes, rinse mouth or eyes out with water immediately. if this material contact with skin or cl oths, wash it off immediately with al cohol and rinse thoroughly with water. 4) glass of lcd panel be careful with chips of glass that may cause in juring fingers or skin, when the glass is broken. 5) electric shock disconnect power supply before handling lcd module. do not touch the parts inside lcd module and the fluorescent la mp's connector or cables in order to prevent electric shock, because high voltage is supplied to these parts from the inverter unit while power supply is turned on. 6) absolute maximum ratings and power protection circuit do not exceed the absolute maximum rating values under the worst probable conditions caused by the supply voltage variation, input voltage variation, variation in parts' constants, environmental temperature, etc., otherwise lcd module may be damaged. employ protection circuit for power supply, whe never the specification or td specifies it. suitable protection circuit should be applied for each system design. 7) recommended operation conditions the performance and quality of the lcd panel are warranted only when the lcd panel is used within ?the recommended operation conditions?. toshiba matsushita display technolo gy co., ltd. never warrants the performance and quality of the lcd panel when you use the lcd panel over ?the recomm ended operation conditions?, although within ?the absolute maximum rating?. to use the lcd panel over ?the recommended operation condi tions? may have bad influence on the characteristics and reliability of the lcd panel and may shorten the life of the lcd panel. therefore, when designing the whole set, not to be over ?the recommended operation c onditions?, you should fully take care of supply voltage change, characteristic of connection parts, serge of input-and-output line, and surrounding temperature. 8) disposal when dispose lcd module, obey to the applicable environmental regulations. ! www.datasheet.co.kr datasheet pdf - http://www..net/

▲Up To Search▲

Price & Availability of LTA121C250F

	To Download LTA121C250F Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .